Can Mattress Protectors Be Tumble-Dried?

Can mattress protectors be tumble-dried?

A mattress protector may be a vital part of your household bedding and it should be waterproof otherwise it's not doing an awfully fine job of protecting your mattress.

One point that we frequently come upon is that the mattress protector isn't washed as often because of the remainder of the bedding. The sheets are deprived and therefore the duvet cover and pillowcases are put within the washing basket but often the mattress protector is left-back.

This can be that individuals see it as being associated with the mattress rather than with the remainder of the bedding or it could be that they do not know if it may be washed or how it is washed.

First of all, let's cover the topic of whether it should be washed. That mattress protector is essentially a barrier between you and also the mattress. It stops moistness, liquids, sweat and other bodily fluids from passing through to the mattress. Its upper exterior should be doing a good job of soaking all of this up, and also the waterproof backing stops it from destroying your mattress.

This means that over time the side becomes home to bacteria, decay and fungus. Thus it's to be washed and preferably as often because of the remainder of your bedding.

This then brings us to the following question, which is at what temperature should a water-resistant mattress protector be washed? To answer this we'd like to travel back to the previous paragraph.

The protector is now potentially smelling all forms of unpleasant things. To completely eliminate these you wish to scrub it at as high a temperature as possible. 90°c would be ideal, and 60°c would be good. Anything smaller than 60°c won't be enough to thoroughly destroy any bacteria present.

Before washing it you would like to test the manufacturer's recommended washing temperature. this may usually be found on a label attached to a seam on the underside. the utmost washing temperature is printed on the label. If it says 40°c then you're out of luck. It cannot be washed at a high enough temperature to scrub it thoroughly, and if you tried to, it'd probably crumble.

Unfortunately, the prevalence of mattress protectors currently available have a maximum washing temperature of just 40°c and to be honest, these should be avoided completely. Nearly every mattress protector that features a quilted upper cover can only be washed at low temperatures, otherwise, the threads inside are eliminated by the warmth.

If your mattress protector brand says that it may be washed at 60°c or maybe better at 90°c then you'll make certain of getting it thoroughly and hygienically clean.

You might be wondering why you wish to read this section in the least. you recognize a way to use your tumble dryer! Certainly, you do. However, the probabilities are that you simply have a water-resistant mattress protector and these sheets need extra care after they are washed and dried inside a glass.

Not sure what you would like to try and do to easily clean your bed? Grab our top-orientate a way to clean a bed.

Wash the protector at the proper temperature

Always start by reading the manufacturer’s suggestions. It should all get on that tiny label stitched into the seam of your mattress protector. The label will propose the right temperature. However, if the label says that you just can wash the protector at 40 degrees Celsius then you've got a controversy. A temperature of 40 degrees Celsius isn't hot enough to kill bacteria, germs, and other things.

Roughly 60 degrees Celsius is the bare limit that may destroy organisms but the best temperature is 90 degrees Celsius. If you're buying a brand new mattress protector or will within the future, avoid people who can only be washed at a maximum temperature of 40 degrees Celsius.

How to dry out a waterproof mattress protector

If your mattress protector has any waterproof areas, then the temperature settings can only be low to medium heat. The sheet will take longer to dry but this can be the sole thanks to safely using a tumble dryer for waterproof materials. The latter risk being melted when the drum stops spinning and therefore the material rests against the new metal on the inside. But if you retain your tumble dryer’s settings at low to medium temperatures, this scenario may be avoided.

That being said, don't leave your mattress protector inside the tumble dryer after the cycle has finished. For safety’s sake, remove it as soon because the cycle is over. The protector should be able to be fitted on the bed after some minutes of cooling.

Leave a comment

Please note, comments must be approved before they are published

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

You may also like

View all
Example blog post
Example blog post
Example blog post